110 Gallon Aluminum Rectangle Fuel Transfer Tank w/ GPI 20 GPM Pump (12V DC)

When it comes to top-quality refueling transfer tanks, trust in JME's expertise and excellence. Our 110 Gallon Fuel Transfer Tank is DOT approved and backed by a Special Permit from the U.S. Department of Transportation, ensuring legal manufacture, marking, and selling of these high-quality aluminum refueling transfer tanks. Whether you're in commercial, state, or private applications, these tanks are built to withstand the toughest conditions and offer peace of mind with their superior construction.

Note: DOT Certified for Gasoline, Diesel, Methanol, Kerosene, Aviation fuel and other liquids

The GPI G20 Fuel Transfer Pump Kit is a groundbreaking solution for fast and efficient refueling. Delivering a true 20 gallons per minute (GPM) through its 14 ft. hose and manual nozzle, this pump is designed to make refueling a breeze. Its innovative rotary gear design ensures a long product life with minimal maintenance, while simplified connection points allow for easy attachment of accessories. Whether you're working with diesel, gasoline, ethanol blends (up to E15), or kerosene, the GPI G20 is the reliable choice for a wide range of applications.

Features

Tank Features

• Multi-Fuel Compatibility: This tank is suitable for a wide range of fuels, including gas, diesel, methanol, kerosene, and aviation fuel.
• Lockable Vent/Prevent Filler Cap: Equipped with a commercial-grade lockable vent/prevent filler cap, providing security.
• Fully Baffled Design: Features a fully baffled interior to reduce the movement of contents during transportation, ensuring stability.
• Reinforced Bungs: Two 2 in. NPT reinforced bungs, providing superior strength and compatibility with various fueling systems.
• Drain Port: Includes a 3/8 in. NPT drain for easy and convenient tank drainage when needed.
• Hold Down Brackets: Designed with hold-down brackets for secure mounting and stability during transport.
• Pressure Leak Detection Test: Prior to shipment, each tank undergoes a pressure leak detection test to ensure it is free from defects.
• Clean and Debris-Free: Our tanks are cleaned both inside and outside, ensuring they are free from debris and contaminants.
• 1-Year Limited Warranty: For added peace of mind, the manufacturer provides a 1-year limited warranty on this fuel transfer tank.
• DOT Certified Special Permit Issued: Our 110 Gallon Fuel Transfer Tank comes with a Special Permit issued by the U.S. Department of Transportation (DOT), ensuring its safety and compliance with regulations.

Pump Features

• True GPM: Enjoy a full 20 GPM at the nozzle for lightning-fast refueling.
• Diecast Aluminum Housing: The corrosion-resistant and lightweight housing ensures durability and longevity.
• Rotary Gear Design: Fewer moving parts mean less friction and wear on components, reducing maintenance needs.
• Spin Collar Mount: Installation and pump orientation have never been easier.
• Factory Installed Power Cord: Reduce installation time and effort.
• Circuit Breaker Protection: Prevents overheating and extends the pump's lifespan.
• Quick Fit Accessories: Easily attach a filter, meter, or both to build your custom system.
• Simple Four Bolt Connections: Mount the pump in multiple directions to suit your setup.

Specifications

Tank Specifications

• Capacity: 110 Gallons
• Material: Aluminum
• Cap Type: Vent/Prevent Filler Cap
• Bungs: Two 2 in. NPT Reinforced Bungs
• Drain Port: 3/8 in. NPT
• Dimensions: 23 1/2 in. x 48 1/2 in. x 24 in.

Note 1: Mounting tabs extend out 1-1/2 in.
Note 2: Add 2-1/2 in. for cap height

Pump Specifications

• Inlet/Outlet Connections: 1 in. NPT
• Flow Rate: 20 GPM (76 L/min)
• Duty Cycle: 30 min. ON; 30 min. OFF
• Pump Housing: Corrosion-resistant diecast aluminum
• Voltage: 12V DC with 40 amp circuit breaker switch
• Type: Rotary Gear
• Current Draw: 34-amps
• Motor: 2000 RPM, 4/10 HP, UL listed to US and Canadian Standards
• Operating Pressure: 12 PSI (0.82 bar) Standard Pressure
• Operating Temperature: -20°F to 125°F (-29°C to 52°C)
• Power Cord: 18 ft. (5.5 m), 12/2 AWG

Applications: Standard use with Mobile Tanks, Small Tractors & Equipment, Pick-up Trucks, ATVs, Snowmobiles, Racing/Automotive, Electrical/Plumbing Contractors & More

Notes:

• Mounting tabs extend out 1-1/2 in.
• Add 2-1/2 in. for cap height
• Pumps with aluminum threads must be coated with Anti-Seize prior to installation. Do not dry fit. Do not use teflon tape or pipe dope.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used.
• This tank must be grounded to your vehicle. Metal to metal contact between mounting hardware and truck bed or running a ground wire to one of the mounting bolts.

* The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc. Failure to follow these guidelines will result in voiding your warranty. Do not install riser between the fuel tank fitting and the pump.

Contents

• ATTTR110: 110 gallon rectangular refueling tank
• GPI16200002: 12VDC fuel pump with manual nozzle 

Downloads