Transfer Tank Package includes a 51 gallon powder coated aluminum refueling transfer tank designed for diesel or gasoline. The package also comes with a GPI HP100 lever actuated hand pump.
*DOT Certified Transfer Tank
Please Note: Additional freight charges will be included on all tanks going to Alaska, Hawaii, and Puerto Rico.
Custom built item - please call 800-333-3331 for details.
Features
- All Aluminum Construction
- Black Powder Coated Finish
- Two 2 in. Female NPT Bungs
- Fully Baffled to Reduce Fluid Movement
- Lockable Vent/Fill Cap
- DOT Approved for Gas and Diesel
- Pressure and Leak Tested
Specifications
Tank Specifications
Important Notes:- Mounting tabs extend out 1 1/2 in.
- Add 2 1/2 in. for fill cap height
A: 24 in.
B: 60 in.*
C: 9 in.
*Note: 55 in. across the bottom; sides of tank taper in at bottom
Pump Specifications
- Material:
- Lightweight, die-cast aluminum housing.
- Stainless steel piston shaft and liner.
- Buna-N seals.
- Built-in air valve to prevent leakage at the nozzle.
- Non-UL Model:
- 3/4 in. x 8 ft. Buna-N hose.
- Thermoplastic unleaded nozzle.
- Built-in nozzle holder.
- UL Model:
- UL Model:3/4 in. x 8 ft. Electrically Conductive hose (UL Listed) with metal nozzle.
- Suction Pipe: Plastic, adjustable 22 to 40 in.
- Pumping Capacity: 1/2 gallon (1.9 litres) per stroke cycle.
- Inlet: 1 in. NPT
- Outlet: 3/4 in. NPT
- Shipping Weight: 14 lbs.
- Hose and Nozzle:
- Pumping Settings: 1/2 gallon setting for high volume, high resistance. 1/4 gallon setting for low volume, low resistance.
- Pumping Settings: 1/2 gallon setting for high volume, high resistance.
- 1/4 gallon setting for low volume, low resistance.
Notes:
Mounting tabs extend out 1-1/2 in.
Add 2-1/2 in. for cap height
Pumps with aluminum threads must be coated with Anti-Seize prior to installation. Do not dry fit. Do not use teflon tape or pipe dope.
Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used.
This tank must be grounded to your vehicle. Metal to metal contact between mounting hardware and truck bed or running a ground wire to one of the mounting bolts.
* The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc. Failure to follow these guidelines will result in voiding your warranty. Do not install riser between the fuel tank fitting and the pump.
Downloads
Installation Instructions (PDF Download)
