*Meets all FHWA (Federal Highway Administration) requirements for non side-mounted fuel tanks.
We make the purchase and installation of Diesel Auxiliary Fuel Tanks easy. We manufacture our diesel fuel tanks specifically for our Fuel Shotz installation kit. The kit comes with the tank so we take all the “guess work” out of it.
*Please make sure to measure your truck bed to verify the tank will fit based on the tank dimensions in the dimensions tab above. Also, please add an additional 1 ½” on the length dimension and width dimension to accommodate the size of the tank mounting tabs.
This diesel FUEL SHOTZ installation kit can be installed in less than an hour. The unique system connects the auxiliary tank to the factory tank via the factory filler. The auxiliary tank keeps the factory tank full. When the auxiliary tank is empty your factory fuel gauge will move off the full mark. The system installs quickly and easily. No wires or switches to install. The system has rollover protection on the tank and on the factory fill neck adapter. Detailed Instructions are supplied with the Fuel Shotz installation kit.
Please Note: Additional freight charges will be included on all tanks going to Alaska, Hawaii, Puerto Rico and non-commercial addresses. Please call for freight quotes.
Notes:
- Mounting tabs extend out 1-1/2 in.
- Add 2-1/2 in. for cap height
- Pumps with aluminum threads must be coated with Anti-Seize prior to installation. Do not dry fit. Do not use teflon tape or pipe dope.
- Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used.
- This tank must be grounded to your vehicle. Metal to metal contact between mounting hardware and truck bed or running a ground wire to one of the mounting bolts.
* The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc. Failure to follow these guidelines will result in voiding your warranty. Do not install riser between the fuel tank fitting and the pump.
Dimensions
- Important Notes:
- Mounting tabs extend out 1 1/2 in.
- Add 2 1/2 in. for fill cap height
A: 17"
B: 55"
C: 18"
Features
- Installs quick and easy
- No switches or wires to install
- Rollover protection on tank and on factory fill neck adapter
- Automotive style cap – Lockable available
- Tig welded seams
- Fully baffled
