With an innovative design that allows meter to be installed in any orientation without regard to scale direction. This Hedland mechanical flowmeter is an economical unit that can monitor noncorrosive water-based or petroleum-based fluids. It's a direct reading, piston-type unit with direct reading scale and 360° rotatable guard and scale that can be installed in any position without sacrificing accuracy. The easy-to-read linear scale with enhanced resolution helps eliminate parallax problems associated with other flowmeters.
Specifications
- 3/4 in. NPTF female fitting
- 3/4 in. nominal port size
- Max. pressure: 3500 PSI/ 241 bar
- Temperature range -20°F to 240°F(-29° to 205°C) continuous & 400°F to 500°F (205 to 260° C) intermittent
- Accuracy: ±2% of full scale
- Repeatability ±1%
- Specific gravity: 0.876
- Have a direct-reading 360° rotatable scale and guard
- Install in any position without sacrificing accuracy
- Easier to read linear scale
- No flow straighteners or special piping required
- Relatively insensitive to shock and vibration
- Good viscosity stability
- Viton® seals
- T302 Stainless steel spring
- Retaining spring & ring SAE 1070/1090 carbon steel Polycarbonate guard
- Nylon end caps
- NPTF certified ANSI B2.2
| Part # | Flow-Rate | 50% Flow Pressure Drop | 100%Flow Pressure Drop |
|---|---|---|---|
| H701A-005_HT | 0.5 to 5 GPM/ 2 to 19 LPM | 2.5 PSI | 3.5 PSI |
| H701A-010-HT | 1 to 10 GPM/5 to 38 LPM | 3.5 PSI | 9.0 PSI |
