BadgerFlex Polar Flow Low Temperature Fuel Dispensing Hose is UL listed and suitable for transferring gasoline, diesel, ethanol blends, and biodiesel blends (up to E10) in cold weather conditions (-65°F). Constructed with an inner tube made from nitrile rubber (NBR) and a chlorinated polyethylene (CPE) cover to protect the hose from external elements.
Note: Assembled with 3/4 in. Male NPT x 3/4 in. Male NPT grounded ends.
Features
- Suitable for cold weather (-65°F to 140°F )
- Nitrile rubber (NBR) inner tube provides excellent resistant to fuel and petroleum-based fluids
- Chlorinated polyethylene (CPE) cover protects against external elements and prolongs the hose's lifespan
- Reinforced with a single layer steel wire braid which provides electrical conductivity for static dissipation
- Hose is manufactured and tested in accordance with the requirements of UL330
Specifications
- Series: Polar Flow
- Type: Fuel Dispensing Hose
- Inside Diameter (ID): 3/4 in. (19.0 mm.) Nominal
- Outside Diameter (OD): 1.13 in. (28.7 mm.) Nominal
- Hose Ends: 3/4 in. Male NPT x 3/4 in. Male NPT
- Length: 8 - 50 ft. - Other Lengths Available - Please Call 1 (800) 333-3331 for More Information
- Inner Tube: NBR
- Antistatic Wire: Stainless Steel
- Outer Cover: CPE
- Reinforcement: Single Layer, Textile Braid
- Minimum Bend Radius: 3.94 in. (100 mm.)
- Maximum Working Pressure: 250 PSI (17.24 bar)
- Minimum Burst Pressure: 1,000 PSI (68.95 bar)
- Operating Temperature Range: -65°F to 140°F (-54°C to +60°C)
- Fluid Compatibility: Gasoline, Diesel, Ethanol Blends, and Biodiesel Blends (up to E10)
- Color: Black
- Approval: UL Recognized Component Manufactured and Tested in Accordance with the Requirements UL330
- Weight: 0.33 lbs./ft. (0.49 kg./m.)
