The DR Electronic Control Handle is designed specifically to dispense motor oils, automatic transmission fluid, antifreeze (Glycol) and antifreeze/water solution. Perfect balance, lightweight, ruggedness, and comfortable grip make it the best choice for overhead reel systems. The electronic register module can be programmed to dispense in pints, quarts, liters, or gallons and will totalize in liters or gallons.
Features
- Electronic register module can be programmed to dispense in pints, quarts, liters, or gallons and will totalize in liters or gallons
- Calibration factor and unit of measure are programmed during factory test. A 5-digit liquid crystal display, accurate to the third decimal place, shows the exact amount of fluid dispensed
- When not in use for 30 seconds, the meter enters sleep mode, which prolongs battery life
- When in sleep mode, the meter is turned on by a simple press of the ON/RESET button or if the meter detects fluid flow
- Trigger allows for progressive opening of the valve for better control of oil delivery and incorporates a trigger lock to prevent accidental opening
- Valve can also be locked in the open position by means of the trigger lock button
Specifications
- Accuracy (after field calibration): +/- 0.5%
- Flow range: 0.25-8 Gal/min
- Max working pressure: 1450 PSI (100 bar)
- Inlet: 1/2" NPT compatible
- Outlet: 1/2" NPT compatible
- Batteries: 2 x 1.5VAAA
- Operating Temp. Range: 14°F - 140°F
- Fluid compatibility: Oils (up to SAE 140) ATF, Antifreeze (Glycol), Antifreeze/ water solution
- Wetted Parts: Liquid Crystal Polymer (LCP), aluminum, stainless steel, NBR, Zinc plated steel, brass
