Balcrank's Lion 450 70:1 high pressure pump for use in applications that require extra pressure output, cold temperatures or when a low air pressure could limit pump performance. Pumps can be used with grease up to NLGI-2 viscosity. For higher viscosity grease a pneumatic or a gravity fed inductor plate might be required. These pumps can be used in large distribution systems that include simultaneous operation outlets.
The air operated pump hoist lifts and lowers the pump, making drum changes easier, faster and safer. The pumps lower end is rigidly fixed to a follower plate with a single rubber lip. The weight of the pump, pump bracket and follower plate plus atmospheric pressure push the assembly against the grease eliminating channeling and air pockets, keeping grease free from contaminants, minimizing waste and aiding pump priming.
Package Includes:
Lion 450 70:1 Pump, Inductor, Gravity, Pump Lift & follower plate
Warning: Do not use any Lion 450/600 series products with flammable fluids.
Features
- Quality construction for reliable performance
- Used with grease up to NLGI-2
- 400 lb. drum pump
- High flow capacity
Specifications
Lion 450 70:1 400 lb Drum Grease Pump:
- Pump Ratio: 70:1
- Continuous Duty Flow-Rate: 5 lb/min (2 kg/min)
- Cycles per lb: 17
- Maximum Free Flow: 16 lb/min (7.25 kg/min)
- Operating Air Pressure: 30 - 100 psi (1.38 - 7 bar)
- Maximum Fluid Stall Pressure: 7,000 psi (490 bar)
- Air Motor Effective Diameter: 4.5 in. (115 mm.)
- Air Motor Stroke: 4 in. (100 mm.)
- Air Consumption: 32.6 cfm (925 Nl/min) - At 5 bar air pressure, NLGI-0 grease at 20° C and 80 cpm
- Air Inlet: 1/2 in. NPT(F)
- Fluid Outlet: 1/2 in. NPT(F)
- Wetted Materials: Cast Iron, Steel, Hard chromed steel, UHMWPE, Nitrile Rubber and PTFE
- Noise Level: 80 dB - Measured at 3’ (1 m) from the pump, 100 psi (7 bar) air pressure and free delivery
Grease Piston Pumps Lion Inductor:
- Diameter of the pneumatic cylinder: 3” (75 mm)
- Stroke of the pneumatic cylinder: 36.6” (930 mm)
- Minimum height of equipment: 58” (1,470 mm)
- Maximum height of equipment: 94.5” (2,400 mm)
- Air inlet: 1/2” NPT(M)
- Maximum air pressure: 116 psi (8 bar)
Applications
- High Volume Grease Applications Such As Fifth Wheel
- Medium/Large Volume Vehicle Maintenance Shops
- Grease Transfer
- In-plant Grease Supply
