Dixon brass hose barb x male NPTF fitting for standard pipe, the hose fittings are compatible with low pressure rubber and elastomeric general service air and water hoses, low pressure hydraulic and contractor water hoses. All standard hose fittings are intended for use with hose clamps or crimped ferrules.
Specifications
- Economy, corrosion resistance
- Hose Barb end x male NPTF
- Working pressure: 250 PSI maximum @ 72°F (22°C)
- Operating temperature range: -40°F to 160°F (-40°C to 71°C) at 150 PSI maximum
- Not vacuum rated
- 360 CDA Brass
- Compliance (thread ends): SAE J476, J512, J514 and J516
| Part # | Size | # of Barbs | Barb Length |
|---|---|---|---|
| 1020404C | 1/4 in. x 1/4 in. | 3 | 0.46 in. |
| 1020402C | 1/8 in. x 1/4 in. | 4 | 0.97 in. |
| 1020408C | 1/2 in. x 1/4 in. | 4 | 0.97 in. |
| 1020602C | 1/8 in. x 3/8 in. | 4 | 0.97 in. |
| 1020604C | 1/4 in. x 3/8 in. | 4 | 0.97 in. |
| 1020606C | 3/8 in. x 3/8 in. | 4 | 0.97 in. |
| 1020608C | 1/2 in. x 3/8 in. | 4 | 0.97 in. |
| 1020612C | 1/2 in. x 3/8 in. | 4 | 0.97 in. |
| 1020804C | 1/2 in. x 3/8 in. | 4 | 0.97 in. |
| 1020806C | 3/8 in. x 1/2 in. | 4 | 0.97 in. |
| 1020808C | 1/2 in. x 5/8in. | 4 | 1.19 in. |
| 1020812C | 3/4 in. x 1/2 in. | 4 | 0.97 in. |
| 1021006C | 3/8 in. x 5/8in. | 4 | 0.97 in. |
| 1021008C | 1/2 in. x 5/8 in. | 4 | 0.97 in. |
| 1021012C | 3/4 in. x 5/8 in. | 4 | 0.97 in. |
| 1021208C | 1/2 in. x 3/4 in. | 4 | 0.97 in. |
| 1021212C | 3/4 in. x 3/4 in. | 4 | 1.19 in. |
| 1021216C | 3/4 in. x 1 in. | 5 | 1.19 in. |
| 1021616C | 1 in. x 1 in. | 5 | 1.19 in. |
Applications
- Industrial air and non-potable water service
- Compressor lines and pneumatic tools & low pressure spray
- Construction air
- Water transfer
