The elastomer disc-shaped device is located in the throat of all Wilkerson lubricators and automatically maintains a constant ratio of oil flow to airflow regardless of changing rates of airflow. This allows one lubricator to serve several pneumatic components operating together or intermittently.
Features
- 6.11 oz. bowl
- Manual drain
- Can be filled under pressure
- High flow capacity
- To adjust and set oil delivery rate the unit must be pressurized and air must be flowing through the unit
- If flow increases or decreases, the oil delivery rate will increase or decrease proportionally
Specifications
- Transparent bowl maximum operating conditions: 150 psig (10.3 bar) and 32°F to 125°F (0°C to 52°C)
- Metal bowl maximum operating conditions: 250 psig (17.2 bar) and 32°F to 150°F (0°C to 65.5°C)
- Use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which will readily break up into a mist, i.e., Mobil DTE light or comparable oil
- Do not use synthetic oil or any oils containing additives or solvents
- SCFM ratings at 150 psig inlet pressure
