The elastomer disc-shaped device is located in the throat of all Wilkerson lubricators and automatically maintains a constant ratio of oil flow to airflow regardless of changing rates of airflow. This allows one lubricator to serve several pneumatic components operating together or intermittently.
Features
- 4.09 oz. bowl
- Manual drain
- High flow capacity
- Can be filled under pressure
Specifications
- Use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which will readily break up into a mist, i.e., Mobil DTE light or comparable oil
- Do not use synthetic oil or any oils containing additives or solvents
- Transparent bowl maximum operating conditions: 150 psig (10.3 bar) and 32°F to 125°F (0°C to 52°C)
- Metal bowl maximum operating conditions: 250 psig (17.2 bar) and 32°F to 150°F (0°C to 65.5°C)
- To adjust and set oil delivery rate the unit must be pressurized and air must be flowing through the unit
- Turn the sight dome, located on the top of the unit, counter clockwise to initiate oil delivery, the rate of oil delivery depends on air flow rate
- If flow increases or decreases, the oil delivery rate will increase or decrease proportionally
- Turning the sight dome clockwise will stop all oil delivery
