These Dixon Wilkerson Manual In-Line Desiccant air dryers are used to remove water vapor from compressed air systems, in applications such as paint spraying, laboratory instruments and small control air systems.
Features
- Filtration for absorber type dryers is important to protect the desiccant bed from contamination
- Cleaner incoming air will result in better performance, longer life and fewer service problems
- Slotted bowl guard for visual detection of color change
- No electrical connection necessary
- Silica gel changes from blue to pink to indicate the need to replace or regenerate the desiccant
- To regenerate silica gel desiccant, it must be heated to at least 350°F for approximately 3 hours or until color has changed from pink to blue
Specifications
- 1.64 lb. bowl
- Will dry up to 4400 standard cubic feet of air
- Desiccant; good for approximately 440 minutes at maximum continuous air flow before regeneration is required
- Provides atmospheric dew point of -45°F with dry desiccant at 100 psi and 70°F
- Transparent bowl maximum operating condition: 150 psig (10 bar) and 125°F (52°C)
- Metal bowl maximum operating condition: 150 psig (10 bar) and 150°F (66°C)
