Donaldson Clean Solutions Dual Head with 50 PSI Bypass was specifically designed for inline applications that cannot lose flow and for circuits where the pump is not equipped with an internal bypass. Bypass is not recommended for most other single pass applications as fluids will not be filtered if the system is unintentionally left in bypass mode. Clean Solutions filters provide unsurpassed fluid cleanliness in a single pass. Filter heads have robust, aluminum construction with steel inserts to minimize metal-to-metal bonding, or galling, between the head and the filter. Viton® seals are used to maintain compatibility with most fluids.
Features
- Aluminum head with steel inserts to minimize metal-to-metal bonding or galling between the head and filter
- Viton® seals are compatible with most fluids
- Pre-ported for optional pressure gauges or service indicators
- 50 PSI bypass valve
- 50 PSI visual service indicator can be mounted on either side of the head by interchanging with blanking plate
- Can easily be installed in Clean Solutions manifolds at the factory or in the field
Specifications
- Connection: 1 1/2 in. SAE 4-Bolt Code 61 Flange
- Filter Quantity: 2
- Max Flow Range: 125 GPM (473 LPM)
- Working Pressure: 350 PSI (2413 kPa/24.1 BAR)
- Rated Static Burst: 800 PSI (5516 kPa/55.2 BAR)
- Operating Temperature: -40 to 245° F (-40 to 118° C)
- Visual Service Indicator: 50 PSI
- Material: Aluminum head with threaded steel inserts and Viton seals
- Compatible Filters: DBB8664, DBB8665, DBB8666, DBB5333, DBB0248, DBB8777, DBB7733
Applications
- Fluid Compatibility: All diesel fuels and lubricants
- Filtration circuits that can’t lose flow (inline lube)
- Circuits where the pump is not equipped with or can’t go into bypass
- Bypass is NOT recommended for most single pass transfer applications
