The patented Facet CIF Series high efficiency coreless pleated paper filter cartridges are designed to effectively remove solid contaminants. The filtration of potable liquids is not recommended with this series of filter cartridges.
These cartridges are constructed to meet the demanding requirements of the industrial filter market. Media with high efficiency throughout the life of the cartridge is available in ratings of 0.5 to 25 microns. We recommend replacing cartridges when the differential pressure reaches 15 psi. Effective life above 15 psid is minimal.
To use the CIF Series cartridge requires the one time installation of either a single, double, triple, or quadruple length center tube kit:
- CIF1KIT
- CIF2KIT
- CIF3KIT
- CIF4KIT
Each kit contains all necessary hardware and components required to convert any housing fitted for 6 in. (152 mm) x 3 1/2 in. (89 mm) ID cartridges.
Features
- Crushable - can reduce your disposal volume by approximately 80%
- No metal components
- Flow rates same as "M" Series
- Incinerable - check your local regulations
- Cartridge alignment is executed at top of center tube-easier, quicker
- Lightweight-contributes to reducing change out time
- Same performance and efficiency as M Series high efficiency pleated paper filter cartridges
- Nitrile rubber gaskets
Specifications
- Outer diameter: 6 in. (152 mm)
- Inner diameter: 3 1/2 in. (89 mm)
- Length: 43 1/4 in. (1090 mm)
- pH Range: 5 - 9
- Max. Temperature: 240° F
- Filter media: High Efficiency Pleated Paper
- Gasket material: Nitrile rubber
- End cap material: Engineered plastics
- Outer body: Perforated oil board
- Adhesives: Urethane
Applications
- Gasoline
- Diesel
- Coolants
- Jet Fuel
- Kerosene
- AV-gas
- Rolling Oils
- Lube Oils
- Chemicals and Solvents
Downloads
Product Literature (PDF Download)
