This industry standard DC pump dispenses up to 15 GPM (57 LPM). The FR1204H is ideal for pumping gas, diesel fuel and kerosene. With an amp draw that's easy on your DC power source. This FR1204H comes complete with 12 ft. static wire hose and manual nozzle. These models are ideal for pumping gas, diesel fuel, and kerosene–with an amp draw that's easy on your DC power source - a complete remote solar power solution for off-grid pump operation. Optimal charge/discharge performance - the system will run for 45 minutes with 6 hours peak sun per day or 22 minutes with 3 hours peak sun per day. Maximum run time without recharge -full battery discharge will occur after 1.8 hours of pump operation.
Features
Pump- Up to 15 GPM
- 1/4 HP motor
- Compatible with diesel, gasoline, kerosene, E15, biodiesel up to B20
- 2" threaded base for tank mounting
- Heavy duty cast iron construction
- Cast bronze rotor with bronze rotary vanes
- Built-in strainer
- 12' hose with static wire
- Manual Nozzle
- Limited lifetime warranty
- Common Applications: Standard use with Mobile Tanks, Small Tractors & Equipment, Pick-up Trucks, ATVs, Snowmobiles, Racing/Automotive, Electrical/Plumbing Contractors & More
- Complete remote power solution for off-grid pump operation
- Weatherproof, UV resistant, outdoor enclosures
- Enclosures can be wall or pole mounted
- High performance valve regulated sealed lead acid batteries
- Advanced battery charge controller protects against overcharge and over discharge
Specifications
Pump- Flow Rate: Up to 15 GPM
- Voltage: 12V DC
- Inlet: 1 in.
- Outlet: 3/4 in.
- Bung Mount: 2 in. NPT
- Housing Material: Cast iron
- Horsepower: 1/4
- Power Cord Length: 18 ft.
- Amps: 20
- Duty Cycle: 30 Min
- Rated Power: 8W continuous output with 6 hours peak sun
- Solar Panel Size: 12VDC 35W
- Battery System: 12VDC @ 36Ah
- Battery Reserve Time @ Rated Power: 27 hours
- Battery Type: Sealed Lead Acid AGM (expected life = 5 years)
- Output Voltage: 12VDC @ 20A
- Load Disconnect Voltage: 11.0VDC
- Load Reconnect Voltage: 12.0VDC
- Controller Self Consumption: <0.5W
- Enclosure Type: Polycarbonate
- Enclosure External Size: 17.5 in. x 12.5 in. x 6 in. (445 mm. x 318 mm. x 152 mm.)
- Enclosure Internal Size: 14 in. x 10 in. x 5 in. (356 mm. x 254 mm. x 127 mm.)
- Operating Temperature: -22F to +140F (-30C to +60C)
- System Weight (without batteries): 22lbs (10kg)
- Battery Weight: 22lbs (10kg)
- Fill-Rite FR1204H 15 GPM - 12V DC Pump
- 3/4 in. x 12 ft. Hose
- 3/4 in. Manual Nozzle
- Fill-Rite 5 ft. Ground Wire
- Fill-Rite 18 ft. 12-Gauge 2-Wire Battery Cable
- Fill-Rite Telescoping Steel Suction Pipe (20 in. to 34 1/2 in.)
- Tycon Solar Panel Kit:
- Solar Panels
- Enclosure
- Batteries
- Charge Controller
- Mounting Hardware
- Cabling
Warranty
• Lifetime Warranty for Castings: Pump castings are warrantied against material and manufacturing defects for the lifetime of the pump. This excludes paint and corrosion related issues. Castings include, but are not limited to, motor frames, inlet flanges and bung adapters, junction box covers, motor housings, pump housings, switch plates, and end bells.
• 5 Year Warranty for Motors: The motor and associated components within the pump are warrantied against material and manufacturing defects for a period of five (5) years. Motor components include, but are not limited to, magnets, armatures, brush assemblies, thermal protectors, lead wires, brush holders, circuit boards, and circuit board wiring harnesses.
• 2 Years for Wearables: Wearable components necessary for the proper function of the pump are warrantied from material and manufacturing defects for a period of two (2) years. Components include, but are not limited to, seals, gaskets, O-rings, springs, vanes, bypass caps, nozzle boots, switch shaft assembly components, line switches, rotors, rotor covers, and paint*
*Paint is warrantied for material and manufacturing defects such as adhesion. Normal wear from product use, exposure to the elements, and/or chemicals resulting in paint degradation or corrosion are excluded
• 1 Year Warranty for Accessories: Accessories included in the package are warrantied from material and manufacturing defects for a period of one (1) year. Accessories include, but are not limited to, accessory cabling and cable connectors, elbows, hoses, nozzles, suction tubes, and anti-siphon kits.
*Product Return Policy: Please do not return this product to the store.
