This industry standard DC pump dispenses up to 15 GPM (57 LPM). The FR1210H pump package is ideal for pumping gas, diesel fuel and kerosene. With an amp draw that's easy on your DC power source. The FR1210H comes complete with 12 ft. static wire hose and manual nozzle.
Features
- Up to 15 GPM
- Explosion-proof
- 1/4 HP motor with permanent magnet and ball bearings
- Cast bronze rotor with bronze rotary vanes
- Automatic bypass valve
- Built-in strainer
- 2 in. threaded base for tank mounting
- Pump may be padlocked
- No foot valve required
- Rain-proof
- Steel telescoping suction tube
- Compatible with diesel, gasoline, kerosene, E15, biodiesel up to B20
- Heavy-duty cast iron construction
- Includes a two-wire battery cable
- 12 ft. hose with static wire
- Limited lifetime warranty
Specifications
- Flow Rate: Up to 15 GPM
- Voltage: 12V DC
- Inlet: 1 in.
- Outlet: 3/4 in.
- Bung Mount: 2 in. NPT
- Housing Material: Cast iron
- Horsepower: 1/4
- Power Cord Length: 18 ft.
- Amps: 20
- Duty Cycle: 30 Min
- Package Contents:
- Fill-Rite FR1210H 15 GPM 12 Volt Pump
- Fill-Rite 20 - 34-3/4 in. Steel Telescoping Suction Pipe
- 3/4 in. x 12 ft. Hose w/ Static Wire
- 3/4 in. Manual Nozzle
- Fill-Rite 18 ft. Battery Cable
- Common Applications: Standard use with Mobile Tanks, Small Tractors & Equipment, Pick-up Trucks, ATVs, Snowmobiles, Racing/Automotive, Electrical/Plumbing Contractors & More
Warranty
• Lifetime Warranty for Castings: Pump castings are warrantied against material and manufacturing defects for the lifetime of the pump. This excludes paint and corrosion related issues. Castings include, but are not limited to, motor frames, inlet flanges and bung adapters, junction box covers, motor housings, pump housings, switch plates, and end bells.
• 5 Year Warranty for Motors: The motor and associated components within the pump are warrantied against material and manufacturing defects for a period of five (5) years. Motor components include, but are not limited to, magnets, armatures, brush assemblies, thermal protectors, lead wires, brush holders, circuit boards, and circuit board wiring harnesses.
• 2 Years for Wearables: Wearable components necessary for the proper function of the pump are warrantied from material and manufacturing defects for a period of two (2) years. Components include, but are not limited to, seals, gaskets, O-rings, springs, vanes, bypass caps, nozzle boots, switch shaft assembly components, line switches, rotors, rotor covers, and paint*
*Paint is warrantied for material and manufacturing defects such as adhesion. Normal wear from product use, exposure to the elements, and/or chemicals resulting in paint degradation or corrosion are excluded
• 1 Year Warranty for Accessories: Accessories included in the package are warrantied from material and manufacturing defects for a period of one (1) year. Accessories include, but are not limited to, accessory cabling and cable connectors, elbows, hoses, nozzles, suction tubes, and anti-siphon kits.
*Product Return Policy: Please do not return this product to the store.
Contents
- Suction Pipe: 20 in. – 34 1/2 in. Steel Telescoping Suction Pipe
- Discharge Hose: 3/4 in. X 12 ft. Hose with Static Ground Wire
- Nozzle: 3/4 in. Cast Aluminum Manual Nozzle
- 12 ft. Static Wire Hose
- 18 ft. Power Cable (2-Wire, 12 GA)
- 3/4 NPT Street Elbow
- Ground Wire
- (2) Wire Nuts
- PTFE Tape Roll
