The pump F/FP 427 is ideal for hygienic applications and suitable for conveying media out of 55 gallon drums, totes, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. The pump has minimal dead spots. The drive shaft, the inner and the outer tube are made of stainless steel. Advanced pump design, 3A certified for the Dairy Industry also ideal for use in the pharmaceutical, cosmetics and food industry. Each sanitary pump can be stripped down in no time for cleaning and/or sterilization.
To Order: All FLUX pumps are subject to technical review with the manufacturer before sale/order release. Please provide the liquid or product to be pumped and the viscosity.
Applications
- Wines
- Liquid Smoke
- Flavorings
- Perfumes
- Sauces
- Dairy Products
Specifications
- Wetted parts are made of stainless steel, ETFE or PTFE
- Stripped for cleaning and/or sterilization with a minimum of effort
- No contamination of the liquid being pumped by shaft lubricants
- Optimum barrel emptying due to ideal impellor design
- The sanitary pump can be stripped down within a few seconds because of its ingenious design. The F 427 does not have any inaccessible voids. This allows you to completely clean the pump at any time.
- Viscosities up to 1200 cp
- Flow rates to 50 gpm
- 3A Certified
Motor Specs
- F 457 single phase universal motor
- 120 Volt
- 60 Hz, 7.5 amp
- 800 Watt
- 9,000 R/min
- Internal ventilation
- Enclosure: IP 24 polypropylene
- 16 ft. cable w/CEE 7/17 plug
- Operating range -4° to 1046F (-20° to 40°C)
