The pump F/FP 427 is ideal for hygienic applications and suitable for conveying media out of 55 gallon drums, totes, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. The pump has minimal dead spots. The drive shaft, the inner and the outer tube are made of stainless steel.
Advanced pump design, ideal for use in the pharmaceutical, cosmetics and food industry. Each sanitary pump can be stripped down in no time for cleaning and/or sterilization. Also available with 3A certification.
Applications
- Foods
- Beverages
- Wines
- Juices
- Liquid Smoke
- White oils
- Flavorings
- Fragrances
- Edible oils
- Sauces
Pump Specs
- Wetted parts are made of stainless steel, ETFE or PTFE
- Stripped for cleaning and/or sterilization with a minimum of effort
- No contamination of the liquid being pumped by shaft lubricants
- The sanitary pump can be stripped down within a few seconds because of its ingenious design. The F 427 does not have any inaccessible voids. This allows you to completely clean the pump at any time.
- 47 in. long tube
- Viscosities up to 1200 cp
- Flow rates to 50 gpm
- Outer tube 43 mm Seal less
Motor Specs
- F 457 single phase universal motor
- 120 Volt 60 Hz, 7.5 amp
- 800 Watt
- 9,000 R/min
- Internal ventilation
- Enclosure: IP 24 polypropylene 16 ft. cable w/CEE 7/17 plug
- Operating range -4° to 1046F (-20° to 40°C)
