The universal F/FP 430 pump can be used for various media and is suitable for conveying out of drums, totes, IBCs and tanks. Due to the construction, the pump can be easily and quickly taken apart into its two main components. Distinct feature, only at FLUX: The inner tube is reinforced with a metal core on plastic models (PP and PVDF). This always allows full function of the mechanical seal. This way, leakage and unnecessary wear are prevented for the complete operating temperature range. Furthermore, it provides highest stability and makes immersion lengths of up to 118 in (3000 mm) possible. The versions in stainless steel and hastelloy C are approved for use in hazardous areas. The stainless steel version is also available as FOOD certified version. Flux complete packaged pump kit for Acids and Alkalis, use for pumping, dosing and mixing disinfectants, cleaning agents and their ingredients from carboys, small containers, drums, totes and IBCs, as well as customized, individual solutions tailored to specific application requirements.
Drum pump F430PP 40/33 in polypropylene construction with hastelloy-C shaft, commutator motor FEM4070, 500 watt with speed control and no-volt-release, polypropylene hand nozzle, 6 ft. length 3/4 in. PVC hose and hose clamps, compression gland in conductive PP for 2 in. bung opening. Flow rate with hose and hand nozzle approximately 10.5 GPM.
Sample Liquids: Detergent/Soap solution, Glycol, Chlorine bleach (sodium hypochlorite), Ammonia water, and boric acid.
To Order: All FLUX pumps are subject to technical review with the manufacturer before sale/order release. Please provide the liquid or product to be pumped and the viscosity.
Features
- Utilizes a mechanical seal for sealing the inner tube
- Pump can be disassembled into two parts: complete inner tube and outer tube
- Extended bearing life due to radial shaft seals prevent corrosive vapors and liquid in the coupling area
- Steel cored inner tube
- Grease-lubricated shaft bearing
Specifications
Pump Specifications:- Series: F430PP 40/33
- Flow Rate: 63 GPM with hose and hand nozzle
- Seal Type: Mechanical seal- Oxide ceramics, PTFE/Coal
- Version: With impeller for max. flow rate, with mixed half axial impeller for max. delivery head (Z-version)
- Pressure-Side Connection: Thread G 1-1/4 A
- Pump Material: 316 Stainless steel
- O-Ring: FKM, EPDM
- Mechanical Seal: Oxide ceramics, PTFE/coal
- Shaft: Hastelloy C
- Impeller: ETFE
- Outer Tube Diameter/Impeller Diameter: 40/33 mm.
- Container: Drums, IBCs, tanks, canisters, hobbocks, mixing containers etc.
- Media Temperature: 0° to 50°F (0 - 100°C)
- Ambient Temperature:0° to 40°F
- Viscosity max: 1000 mPas
- Series: FEM 4070 single phase universal motor
- Enclosure: IP 24
- ATEX Ex II 2 G Ex d e IIC T6
- Ventilation: Internal
- Voltage: 120V
- Frequency: 60 Hz
- 5.2 amp nominal current
- Capacity:500 W
- Variable Speed
- Power supply cable: H05 RN-F 2X 0.75
- Cable: 16 ft. Long with CEE 7/17 standard plug
- Operating Temperature: -4 to 104° F (-20 to 40°C)
- Weight: 11.2/13.0 lbs. (5.1/5.9 kg)
Downloads
Pump Operating Manual (PDF Download)
Pump Metallic Performance Curve (PDF Download)
Pump Tech Sheet (PDF Download)
Spare Parts List (PDF Download)
Motor Tech Sheet (PDF Download)
