Flux Pump's sealless F/FP 424 pump is for transferring various liquids that are a low-viscosity and aggressive media. It is suitable for free flowing liquids that are clean and non-abrasive. For use with drums, totes and IBC's.
The advantage of Flux Pumps is the spiral-shaped guide bearing in the inner tube which prevents media build-up in the pump and increases the service life.
Features
- No seal in liquid zone
- Suited for hydrochloric acid and chromic acid
- Top pull out design for easy cleaning / inspection
- Long service life of bearings
- Multiple bearing drive shaft
- Low wear out of guide-bearing and shaft
- Reversible Hastelloy C drive shaft (double life)
- Low vibration
- Double radial lip seals (Viton, EPDM, PTFE)
- Spiral shaped guide bearing with large guide length
- Foot piece has a screw-on design
- ETFE impeller
- Thick wear surfaces means long working life
Specifications
- Polypropylene pump
- Pressure side connection: Thread G 1 1/4 in. A
- Flow-rate: 63 GPM (240 LPM)
- Axial Impeller
- 41in. diameter outer tube
- 36mm diameter impeller
- 39 in. immersion depth
- Delivery head Max. (mwc): 42 ft. (13M)
- Viscosity max.: 1200cPs
- Impeller: PTFE
- O-Ring: FKM
- Shaft: Hastelloy C, Stainless steel & Titanium
- For use with: drums, IBC, tanks, canisters, hobbocks, and containers
- Media temperature range: 32° to 122° F (0 to 50° C)
- Ambient temperature range: 32° to 104° F (0° to 40° C)
- Weight: 2.2 lbs.
Downloads
Product Manual (PDF Download)
