Flux Pumps 24-00001681 F430 Miniflux Pump Kit w/ 3/4 in. Hose Barb F458 120V Motor 7/8 in. 6 ft. Hose and Manual Nozzle

The MINIFLUX compact container pump is designed for emptying tote and IBCs by use of the bottom drain connection. The pump is small, light, easy to handle and made of stainless steel material for handling a wide range of corrosive and non-corrosive fluids. Designed as an alternative to a vertical pump, the MINIFLUX can be used when an IBC is not accessible from the top opening. It is suitable for applications when gravity draining via the outlet tap is insufficient (e.g. greater flow requirement) or to transfer to another container in a higher location. This compact pump can be powered by an electric or compressed air motor.

Application: For use with IBCs and Totes

Note: kit includes the Miniflux pump, F458 electric motor, hose, hand nozzle, support cable and retrofit kit (The kit DOES NOT include the IBC / Tote tank)

Features

Direct Outlet Pumping: For pumping out of IBCs directly from the outlet, streamlining liquid transfer processes
Effortless Connection: Simple connection of the pump to the outlet by a union nut, ensuring quick and hassle-free setup
Space-Saving Design: Compact design with minimal space requirement, optimizing utilization of workspace
Modular Dismantling: Can be dismantled into two parts via a clamp, facilitating maintenance and storage convenience
Lightweight Construction: Low overall weight of 2.5 lbs., enabling easy handling and portability
Top Access Not Required: Does not require access to the container from above, offering versatility in installation
Motor Compatibility: Ideally combined with commutator motor or compressed-air motor, providing flexibility in power source selection
Enhanced Performance: Significantly higher flow rate and pressure compared to draining by gravity, ensuring efficient liquid transfer
Versatile Delivery Options: Delivery against closed valve possible (e.g., hand nozzle, flap valve, etc.), expanding operational versatility
Hazardous Area Suitability: Suitable for use in hazardous areas, ensuring safety and compliance in demanding environments

Specifications

Pump Specifications

Union Nut Connection: Connects to IBC by a Union Nut S60 x6M/li>
Length: 5 5/16 in. (135mm)
Flow Rate: 63 GPM max flow rate
Viscosity Handling: Viscosity 1000 mPas
Maximum Delivery Head: 42.5 ft.
Outer Tube Diameter: 1.61 in (41 mm)
Inner Tube Diameter:0.98 in. (25 mm)
Material: Stainless steel
Temperature Range: Temperatures up to 212° F (100° C)
Maximum Solid Passage: 3/4 in.
Sealing: Mechanically sealed
Fluids handled: Low concentration Acids & Alkalis, Solvents, Water based solutions and Flammables

Motor Specifications

Motor: 120 V single phase universal motor
Nominal Frequency: 60 Hz
Power Output: 460 watts, 1 HP
Nominal Current: 4.4 amps
Ventilation: Externally vented
Protection: Circuit breaker protected
Power supply: 16 ft. Long cable (H 07 RN-F 3G 1.5) w/ CEE 7/7 standard plug
Operating temperature: -4 to 104°F (-20 to 40°C)
Enclosure: TEFC Enclosure/ IP55