GPI's G2 Stainless Steel Tri-Clamp Turbine Meter for the craft brewery industry features a local display designed to handle high-temperature applications up to 185°F (85°C). Commonly used in breweries to measure the volume of strike water added to the malted grains, an essential process in brewing high-quality beer. The meter is calibrated in gallons (field configurable) with 2 totals (Batch Total = Resettable, Total = Non-Resettable) and includes 2 AAA Alkaline batteries.
Pressure Rating: 1,500 PSI (102 bar)
Operating Temperature Range: 0°F to 185°F (-18°C to 85°C).
Features
- Stainless steel for food and beverage applications
- High temperature local display (185°F/85°C)
- Meter is designed for thin fluids < 100 cP
- Modular design allows for use with output modules, sensors and remote display kits
- Computer display has 2 Totals (Batch Total = Resettable, Total = Non-Resettable); Rate of Flow, Factory calibrated in gallons - field calibratable - Includes non-volatile totals
- High accuracy meter
- Internal parts are simple to replace for easy maintenance
- AAA Alkaline battery life: 2 years (included)
- Accessories easily upgrade meter
Specifications
- Type: Industrial Grade Craft Brewery Meter
- Meter Size: 1 in.
- Fitting Size: 1 1/2 in. Tri-Clamp (Fitting size is one size bigger than meter size)
- Turbine Material: Stainless Steel
- Turbine with Local Display: 2 Button Computer with High Temp Riser (185°F/85°C), Field Configurable (2 Totals and Rate of Flow)
- Calibration: Gallons/Minute
- Housing Material: 316 Stainless Steel
- Flow Rate: 5 - 50 GPM (19 - 190 LPM)
- Accuracy:
- Turbine Only: +/- 1.5%
- Turbine w/ Computer: +/- 1.0%
- Repeatability: +/- 0.1%
- Pressure Rating: 1,500 PSI (102 bar)
- Operating Temperature Range: -40°F to 250°F (-40°C to 121°C)
- Operating Temperature Range w/ Computer & Hi-Temp. Riser: 0°F to 185°F (-18°C to 85°C)
- Typical K Factor: 565 PPG (149 Pulses/L)
- Wetted Materials:
- Housing: 316 SS
- Bearings: 96% Alumina Oxide Ceramic
- Shaft: Tungsten Carbide
- Rotor: PVDF
- Rings: 316 SS
- Frequency Range: 47 - 470 Hz @ 5 - 50 GPM (19 - 190 LPM)
- Calibration Report: Comes standard with G2 Series meters - N.I.S.T. Certification available
- Approvals: CE, NEMA 4, IP65
Downloads
FLOMEC Industrial Grade Turbine Housing Owner's Manual (PDF Download)
Q9 Computer Owner's Manual Manual (PDF Download)
Product Literature (PDF Download)
Specification Sheet (PDF Download)
