The M30 Mechanical Fuel Meter is designed for the field measurement of thin viscosity petroleum fuels only and intended for use with pump systems in the19 to 114 L/m or 5 to 30 GPM flow range (not intended for gravity flow systems). Using mechanical gears, these meters translate flow data from a nutating disk into calibrated units which are indicated on the face of the meter.
Note: Designed, tested and approved for use with thin viscosity petroleum fuels such as gasoline blends (up to E15), diesel fuel blends (up to B20) and kerosene.
Features
- Easily attaches to the new G20 fuel transfer pump
- Features simple four-bolt connections that allow the meter to be mounted in multiple directions
- Magnetic drive replaces the driveshaft and seal, eliminating driveshaft leaks
- Within +/- 2% across a flow range from 19 to 114 L/min (5 to 30 GPM)
- Easy to calibrate
Specifications
- Unit of Measure: Litres
- Flow Range: 19 to 114 L/min
- Inlet/Outlet: 1 in. NPT
- Max Batch Total: 999.9
- Max Cumulative Total: 999,999.9
- Operating Temperature: -20° F to 125° F (-29° C to 52° C)
- Max Operating Pressure: 50 PSI (3.4 bar)
- Technology: Nutating Disc with Magnetic Drive
- Accuracy: ±2%; (Accuracy is factory calibrated using diesel fuel)
- Material (Housing, Cover & Fittings): Aluminum
- Wetted Material:
- Nutator Assembly: PBT (Polybutylene Terephthalate), Stainless Steel
- Seals: NBR (Nitrile Butadiene Rubber)
- Mag-Drive: Acetal, Stainless Steel, Neodymium (Nickel Plated)
- Approvals: UL Listed
Downloads
GPI M30 Fuel Meter Product Owners Manual (PDF Download)
