Choose cost-saving convenience with Graco's EGP electric pumps. Attach the EGP transfer pump directly to roll-around barrels for more mobility in more places. These pumps offer the same powerful, high-quality performance you've come to expect from Graco - only for less operating cost and more convenience. Used for pumping non-flammable fluids, including motor oils, hydraulic fluid, and antifreeze. Do not use to pump water. Not approved for use in explosive atmospheres or hazardous (classified) locations.
Use the EGP Transfer Pump in locations where compressed air is unavailable or too cumbersome for short distance fluid transfer.
Note: EGP™ Transfer Pump & Dispense Packages include a bung adapter (260061), dispense kit (133376), and suction kit (133375).
Features
- Smooth Fluid Flow - Output is continuous and non-pulsating up to 3.9 GPM (14.8 LPM)
- Heavy-Duty Motor with Long Life - Industrial-grade electric motor with over-temperature protection on 115 VAC model
- Consistent Pressure - Built-in fluid bypass valve protects pump and downstream components
- Pump Protection - Includes inlet strainer to keep larger debris out of pump housing and extend pump life
- Plug and Play - Self-priming, precision machined pump design
Specifications
- Part: 25T820
- Type: Electric Gear Pump
- Voltage: 115V AC
- Hertz: 60 Hz
- Motor Type: ODP
- Horsepower: 1/2
- Maximum Current: 8.7 Amps
- Maximum Free Flow Rate: 3.9 GPM (14.8 LPM)
- Maximum Speed: 1750 RPM
- Maximum Pressure: 65 PSI (4.5 bar)
- Automatic Relief Setting: 65 PSI (4.5 bar)
- Inlet: 1 in. FNPT
- Outlet: 3/4 in. FNPT
- Wetted Parts: Carbon Steel with Zinc Plating, Stainless Steel, Galvanized Steel, Aluminum, Nitrile, Rubber PVC, PVC Cement
- Fluid Pressure Control Type: Internal Bypass, Electrical Pressure Shut Off Switch
- Compatible Material: Petroleum and Synthetic Based Oils (Motor, Gear and ATF), Waste Oil, Antifreeze, Hydraulic Fluids, Cutting Oils, Non-Flammable Oil-Based Solvents, Oil-Based Herbicide Carriers
- Dimensions: 14 in. (356 mm.) L x 6.5 in. (165 mm.) W x 8.7 in. (221 mm.) H
- Weight: 22 lb (10 kg)
Applications
- Filling Bulk Tanks From Drums
- Lubricant Transfer from Remote Locations
- Construction Equipment
- Agricultural Equipment
- Filling In-Plant Machinery
- Evacuating Used Oil Receivers
- Filling Shop Oil Furnaces with New or Used Oil
- Automotive and Truck Service Garages
- Fleet Marine and Personal Boat Service
- Aircraft Maintenance
Downloads
Product Manual (PDF Download)
