The Graco T3 supply piston transfer pump uses Graco's Merkur air -motor and stainless steel tube. The T3 is a 3:1 ratio pump that uses less air pressure to provide the same fluid pressure needed. The Merkur air motor requires less maintenance because of it's air pilot valve technology. This males the T3 pump 3x's quieter than the T2 transfer pump. The overall height of the T3 transfer pump is shorter than the T2, making it easier to maneuver and remove from a drum.
Specifications
- Pneumatic piston pumps
- 3:1 pump ratio
- 1/4 in. (6.35 mm) female NPT Air inlet
- 33.37 in. L carbon steel tube
- Industrial application
- 3/4 in. Female NPT fluid outlet
- Maximum flow rate: 4.5 GPM
- Recommended pump speed: 120 CPM
- Volume per pump cycle: 0.034 gal (0.128 l)
- Compatible material: Polyurethane foam, Polyurea
- Air inlet pressure: 100 PSI (6.9 bar)
- Maximum working pressure: 315 PSI (21.7 bar)
- Seal material: PTFE
- Max ambient operating temperature: 120° F ( 49° C)
- Max fluid temperature range: 190° F (88° C)
- Sound Power level: 72.9 DBa @70 PSI
- Sound pressure level: 82.8 DBa @ 70 PSI
- Wetted material: Stainless steel, PTFE
- Weight: 28 lb. (12.7 kg)
