This general purpose 2 way, internally piloted, normally closed solenoid valve is used with applications that require high flow rates. All Granzow solenoid valves are produced in an ISO 9001:2015 certified facility and are 100% tested before shipping.
Note: Please contact us for additional valve configurations, sizes and voltages not listed.
Features
- 120 Volt AC or 24 Volt DC
- Viton seal
- High flow rates
- 100% tested before shipping
- Used in a wide range of applications
Specifications
- Pipe Size: 3/8 - 3/4 in. NPT
- Orifice Size: 1/2 - 3/4 in.
- Flow Factor: 4.10 - 9.80 Cv
- Power: 8 watts
- Minimum Operating Pressure: 2 psi
- Maximum Operating Pressure: 232 psi
- Voltage/Current: 120 V AC or 24 V DC
- Electrical Connection Rating: NEMA 4
- Inrush VA: 25.0 (120 V AC only)
- Holding VA: 14.5 (120 V AC only)
- Electrical Connector: Cable Grip DIN
- Body: Brass
- Armature Tube: Stainless Steel 300
- Fixed Core: Stainless Steel 400
- Plunger: Stainless Steel 400
- Spring: Stainless Steel 300
- Shading Ring: Copper
- Orifice: Brass
- Sealing Material: Viton (FKM)
- Seal Operating Temperature: 14-280°F
- Medium Examples: Air, Inert gas, Water
Applications
- Water Treatment and Filtration: Series W solenoid valves are very popular for emergency shutoff and inlet feed valves on water treatment applications - Considering the high flow rates and ability to have adjustable closing speeds, these features ensure a high performance valve which will have a very high degree of reliability versus competitive offerings
- Boilers and Water Heaters: Manufacturers of boilers and water heaters frequently utilize Granzow Series W valves for inlet feed or low pressure steam control
- Aquatics: Highly preferred solenoid valves for fountains, splash pads, commercial swimming pools and waterpark attractions due to the balance between performance and pricing
- Low Pressure Steam: Low pressure steam applications require the use of sealing materials which can handle up to approximately 30 psi of steam (or head pressure)
