The GROZ Heavy Duty Electronic Oil Control Gun features an aluminum die cast meter and body with a built-in continuous flow switch for un-attended dispensing. The electronic display uses one CR2450 battery and is capable of measuring in US gallons, liters, quarts, pints, ounces and deciliters. It can also be easily recalibrated to ensure an accurate reading every time. This model includes a flexible hose extension.
Features
- Flexible Hose Extension and Manual non-drip nozzle
- Electronic battery-powered display
- Aluminum die cast meter & gun body
- Built-in continuous flow switch can be activated for un-attended dispensing
- Measures in litres, US gallons, quarts, pints, ounces and decilitres
- Easy user re-calibration
- Swivel at inlet for easy maneuverability
- Strainer in the swivel keeps contaminants, dust, grit, etc. away from entering the gun
Specifications
- Recommended Use: Oils with viscosity up to SAE 140
- Flow Rate: 0.3 - 8 GPM (1 - 30 LPM)
- Accuracy: +/- 0.50%
- Repeatability: 0.20%
- Maximum Working Pressure: Up to 1,000 PSI (70 BAR)
- Operating Temperature: 7° to 131° F (-14° to 55° C)
- Maximum Resettable Batch Total: 99,999.9 units
- Maximum Non-Resettable Totalizer: 99,999.9 units (6 digit)
- Least Count/Resolution: Up to 0.001 units
- Display Output: User selectable for 0.1, 0.01, 0.001 units
- Inlet Threaded: 1/2 in. NPT (F)
- In-Line Swivel: Included
- Outlet Diameter of Steel Spout: 1/2 in. (12.7 mm)
- Inside Diameter of Hose Extension: 1/2 in. (12.7 mm)
- Wetted Components: Aluminum, Acetal, Brass, Nitrile Rubber and Steel
