The Husky 1050e combines all of the benefits of a traditional air operated diaphragm pump like self-priming, stalling under pressure and increased diaphragm life with the benefits of an electric pump like energy cost savings, reduced pulsation and increased pump control.
Features
- Up to 80% more efficient than an air operated diaphragm pump
- The first electric diaphragm pump on the market that will stall under pressure
- Reduce pulsation without the addition of pulsation dampeners
- Mobile cart options available for easy and quick movement
- Can run dry
- Self-priming (no need to fill the pump to operate)
- Patent pending technology allows pump to stall under pressure preventing pump failures from clogged lines or closed valves
- Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
Specifications
- Maximum Fluid Working Pressure: 70 psi (4.8 bar, 0.48 MPa)
- Air Pressure Operating Range: 20 to 80 psi (1.4 to 5.5 bar, 0.14 to 0.55 Mpa)
- Air Inlet Size: 3/8 in. NPT(F)
- Maximum Suction Lift: Wet: 29 ft. (8.8 m); Dry: 16 ft. (4.9 m)
- Maximum Size Pumpable Solids: 1/8 in. (3.2 mm)
- Ambient Air Temperature Range for Operation and Storage: 32°F to 104°F (0°C to 40°C)
- Fluid Displacement per Cycle: 0.15 Gallons (0.64 L)
- Maximum Free Flow Delivery: 42 GPM (158 LPM)
- Maximum Pump Speed: 280 cpm
- Fluid Inlet and Outlet Size: 1 in. NPT(F)
- AC Motor Power: 2 HP 230 VAC
- Compressor: 110VAC
- Operation Manual: 334188
Applications
- Chemical Transfer
- Diesel Exhaust Fluid (DEF) Transfer and Dispense
- Oil Transfer
- Bulk Supply System
- Medium Viscosity Material Transfer
- Low Viscosity Material Transfer
- Ink Transfer
- Metered Fluid Dispense
- Non-Metered Fluid Dispense
- General Metal Finishing - Pumping
