JME's ProG Plus Fuel Dispensing Hose is UL listed and suitable for transferring gasoline, diesel, ethanol blends, and biodiesel blends (up to E10). Constructed with an inner tube made from nitrile rubber (NBR) and a chlorinated polyethylene (CPE) cover to protect the hose from external elements.
Note: Assembled with 3/4 in. Male NPT x 3/4 in. Swivel Male NPT grounded ends.
Features
- Nitrile rubber (NBR) inner tube provides excellent resistant to fuel and petroleum-based fluids
- Chlorinated polyethylene (CPE) cover protects against external elements and prolongs the hose's lifespan
- Reinforced with a single layer steel wire braid which provides electrical conductivity for static dissipation
- Hose is manufactured and tested in accordance with the requirements of UL330
- Assembled with 3/4 in. Male NPT x 3/4 in. Swivel Male NPT grounded ends
Specifications
- Series: ProG Plus
- Type: Fuel Dispensing Hose
- Inside Diameter (ID): 3/4 in. (19 mm.) Nominal
- Outside Diameter (OD): 1.13 in. (28.7 mm.) Nominal
- Hose Ends: 3/4 in. Male NPT x 3/4 in. Swivel Male NPT Grounded Ends
- Length: 8 - 100 ft. - Other Lengths Available - Please Call 1-800-333-3331 for More Information
- Inner Tube: Nitrile Rubber (NBR)
- Outer Cover: Chlorinated Polyethylene (CPE) - Black
- Reinforcement: Single Layer, Steel Wire Braid (Electrically Conductive)
- Minimum Bend Radius: 3.94 in. (100 mm.)
- Maximum Working Pressure: 250 PSI (17.24 bar)
- Minimum Burst Pressure: 1,000 PSI (68.95 bar)
- Operating Temperature Range: -40°F to 158°F (-40°C to +70°C)
- Fluid Compatibility: Gasoline, Diesel, Ethanol Blends and Biodiesel Blends (up to E10)
- Compliance: UL Listed
- Weight: 0.47 lbs./ft.
Downloads
Product Drawing (PDF Download)
