Lechler tank and equipment cleaning nozzles are used for thorough cleaning of all kinds of tank sizes, machines and equipment. Cleaning nozzles achieve high cleaning performance even at low pressures. This saves on high energy costs. The nozzles are driven and lubricated by the cleaning fluid and are therefore maintenance-free and reliable.
Stationary spray balls do not rotate and therefore require considerably more fluid. They are used primarily for rinsing tanks. The force of impact when using a liquid jet on a surface plays an important role in cleaning technology. The impact surface is the area where the droplet strikes. The smaller the surface area, the greater the impact values. Nozzles with high impact are, for example, solid stream nozzles and flat fan nozzles with a narrow spray angle. Increasing the flow rate by using a larger nozzle increases the impact, assuming that the other parameters (spray angle, pressure and medium) remain the same.
Features
- Robust compact design
- Threaded connection
- Suitable for very high temperatures
- Suitable for operation with steam and air
Specifications
- Stationary spray ball
- Spray angle: 240°
- Connection: 1/2 in. Female NPT
- Recommended operating pressure: 45 PSI
- Flow rate: 9.13 GPM (34 LPM)
- Max tank diameter: 23 ft.
- Maximum operating temperature: 392° F
- Maximum ambient temperature: 482° F
- Surface quality: ≤ 6.3 Micron
- Material: Stainless steel
- Insertion diameter: 1.22 in.
- Narrowest free cross section: 0.039 in.
- Installation: Operation in every installation position
- Suitable for steam
- No Bearing
- Recommended filter: Smaller than the narrowest cross-section
- Meets FDA requirements
