The water paste is a green paste that turns pinkish/red when it comes into contact with water. The water paste is used to detect free water in almost all petroleum products as well as some petrochemicals. It has a toothpaste like consistency and is packaged in a 3.75 oz./106 g. Net Wt. jar.
Note: Store between 50 - 85°F (10 - 29 °C) with cap tight to avoid moisture contamination. Shelf life is unlimited.
Features
- Fast reaction time
- No guessing
- Easy to read results
- Fast cleanup process
Directions
Spread a smooth, even coat of the product on the bob or gauging device where you anticipate free water to be present. Lower the gauging device through the petroleum product to the bottom of the tank and leave it for approximately ten seconds. If there is water present, the green paste will turn pinkish/red contrasting to the green color above the water level. When reading the results, please note a straight demarcation on the gauging device.
*Please note that McCabe Water Level Indicator Paste is not intended for use in ethanol-blended gasoline or other products that are blended with ethanol/or alcohol, as they interfere with the normal reaction of the paste.
Downloads
McCabe Water Indicator Paste Safety Data Sheet (PDF Download)
