The 9095SA Aluminum Overfill Prevention Valve is installed at the fill port of a storage tank. Used in a pressurized tight fill application, the valve helps prevent tank overfills by closing when the liquid level reaches a pre-set warning level (90-95% full).
The valve is installed on a standard 2” NPT male connection and has a built-in bleed hole that allows the fill hose pressure to be relieved after the valve closes. This bleed hole also provides anti-siphon protection for the valve.
The 9095SA comes with a 2" Part F for mounting directly to the valve.
Features
The valve design allows for a full flow fill until it closes.
Designed for fuel not requiring a drop tube.
A field adjustable float allows the installer to set the desired shut-off point. The vertical float allows for installation in openings in proximity to the tank walls.
The valve shut-off length is field adjustable from 2 to 12 inches.
The valve can be installed in various configurations on the tank:
-Directly onto the top of the tank without a spill container.
-Between a Morrison 517 Spill Container and the tank top.
-Inside a Morrison 2” 518 Spill Container.
A pressurized tight fill connection is required for operation
