NOSHOK 11 series clamped-style sanitary digital transmitter provides local indication for pressure. This durable pressure transmitters has a diffused semiconductor and proven sputtered thin film sensor technology to provide a highly accurate, stable and shock resistant reading. Ideal for applications including food & beverage processing, pasteurization systems, pharmaceutical and medical. 3A Certified.
NOSHOK pressure transmitters or transducers are not to be used in heat sterilization systems as stated in 3A Standard 74-03 paragraph D10.1.2.
Diaphragm seal must be installed facing downward or in a vertical position for drain ability. Do not install diaphragm seal facing in an upward position. These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Features
- Integral 36 in. cable connection
- Current and voltage output data available
- 316 Stainless steel wetted parts electropolished to Ra25
- Clamp-style fittings are constructed of T304 Stainless Steel
- Double hinge design for easy installation and removal
- CE compliant to suppress RFI, EMI, and ESD
- Can be cleaned-in-place (CIP) or steamed-in-place (SIP)
Specifications
- 2" Sanitary Clamp
- Pressure range: 0-200 PSI
- 316 Stainless Steel
- ±0.25% Accuracy (Best Fit Straight Line (BFSL))
- Output signals: 4mA to 20 mA, 2 wire
- Electrical connection: Integral 36 in. Cable
- Seal Fill fluid: FFL77 White Oil
- Service life: 100,000,000 Load Cycles
- Operating Temperature range: -40° F to 300° F (-40° to 150° C)
- Media temperature: -40 ° to 176° F ( -40 ° to 150° C)
- Adjustment: ±10% full scale for zero and span
- Stability: ±0.2% full scale for 1 year, non-accumulating
- CE compliant to suppress RFI, EMI and ESD
- Ingress Protection (IP65)
- Electrical protection: Reverse polarity, over-voltage and short circuit protection
- Output signal: 4 mA to 20 mA, 2-Wire, 0 Vdc to 5 Vdc 3-Wire, 1 Vdc to 5 Vdc 3-Wire, 1 Vdc to 6 Vdc 3-Wire, 0 Vdc to 10 Vdc, 3-Wire, 1 Vdc to 11 Vdc 3-Wire
- Power requirements: 10 Vdc to 30 Vdc (4 mA to 20 mA, 2-Wire, 0 Vdc to 5 Vdc, 3-Wire, 1 Vdc to 5 Vdc, 3-Wire, 1 Vdc to 6 Vdc, 3-Wire) 14 Vdc to 30 Vdc (0 Vdc to 10 Vdc, 3-Wire, Vdc to 11 Vdc, 3-Wire).
- Industry Standards/ Certifications: European Conformity (CE) Compliant to Electromagnetic Compatibility (EMC) Norm European Standards (EN) 61326:2014/A1:1998, Radio Frequency Interference (RFI), Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) Protection
- All clamps and gaskets meet FDA and 3A sanitary standards
- 3 Year warranty
Downloads
Spec Sheet (PDF Download)
