This Product Supersedes: The Liquip 700 series and OPW 1004 D4 API Couplers - please call 800-333-3331 if you have questions.
The LYNX Series bottom loading couplers represent a new era from OPW Engineered Systems. Minimal leakage. And perhaps most impressive: incredibly quick and easy disassembly of the entire coupler thanks to a revolutionary U-pin design.
The LYNX series brings together the best features of all API couplers to provide a superior and effortless bottom loading experience. Built with some key stainless steel components and coming in at 19 lbs. (8.6 kg.), the industry leading LYNX Series coupler is impressive by any measure. From the moment you use the LYNX, you will experience outstanding performance and advanced safety combined with ease of servicing and extended service. The LYNX has been developed with attention to detail and superior quality.
Operating Temperature Range: -40°F to 200°F (-40°C to 90°C)
Note: 5 year warranty on all metal components only.
Features
- Fast in-field replacement of the main seals, on or off the arm
- Quick and easy disassembly of entire coupler through U-pin design
- Automatic latching
- U-pin is secured when the TTMA flange is fastened to prevent the pin from coming out during service
- A variety of seals available to suit a range of applications
- Two operating handle sizes to suit customer preference
- Four “true-interlocking” stainless-steel latches ensure secure coupling and maximum safety
- High-quality components including a stainless-steel collar and hard anodized Aluminum body for increased service durability and life
- Nominal product leakage during disconnect increases site safety
- Low risk of leakage because of a proven seal design
- Ergonomic operating handle and carry loop results in less physical strain on users
- 5 year warranty on all metal components only
Specifications
- Type: Lynx API Coupler
- Maximum Working Pressure: 80 PSI (5.5 bar)
- Product Test Pressure: 119 PSI (8.2 bar)
- Design Pressure: 363 PSI (25 bar)
- Maximum Surge Pressure: 493 PSI (34 bar)
- Seal: Ultra Low Temperature FKM
- Operating Temperature Range: -40°F to 200°F (-40°C to 90°C)
- Handle Length: 7.8 in. (200 mm.)
- Mounting:
- By industry standard 4 in. (100 mm.) TTMA Flange
- 8 holes Ø7/16 in. on 5.8 in. PCD, 6.6 in. outside diameter (Ø11 mm. on 149 mm. PCD, 168 mm. OD)
- Use spring washers when mounting coupler as per common industry practice
- Dismantling: Removal of one U-pin enables the shaft assembly and main poppet to be withdrawn
- Design Standard: API RP 1004 8th EDITION 2003 - Bottom Loading and Vapor Recovery; AS5602-2009
Downloads
LYNX Product Manual (PDF Download)
