RDS Manufacturing 45 Gallon Aluminum Rectangular/Vertical DOT Certified Transfer Tank

RDS Manufacturing 45 Gallon Aluminum Rectangular/Vertical Transfer Fuel Tanks are made in the USA and are DOT approved for transferring diesel fuel, gasoline or aviation fuel. These tanks have fully welded seams and are 100% pressure tested before leaving the manufacturer. Aluminum tanks do not rust, protecting fuel from contamination.

Note: Transfer tanks have a drain plug and can be used to gravity feed diesel.

Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.

• The fill cap location and pump location cannot be swapped.
• Do not install risers between the fuel tank fitting and the pump.
• Do not use extension pipes to raise the height of the transfer pump.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.

Features

• 2 in. female pipe thread coupling for manual or 12V transfer pump (sold separately)
• 0.125 in. heavy-duty aluminum construction - No rusting
• Fully welded seams
• 100% pressure tested
• Built-in baffles reduce sloshing
• Lockable gas cap
• Rollover safety valve (vent)
• Includes 3/8 in. FTP drain plug
• DOT approved tank can be used to transport diesel, gasoline, or aviation fuel

Specifications

• Shape: Rectangle/Vertical
• Material: Aluminum
• Finish: Diamond Plated or Diamond Plated Black Powder Coated
• Capacity: 45 Gallon
• Weight: 56 lbs.
• Dimensions: 57 in. L x 9.5 in. W x 20 in. H

Important Notes:

• Mounting tabs extend out 1 in. - adds 2 in. to total length and 1 in. to total width
• Add 2 1/2 in. for fill cap height
• Always measure the truck's bed for clearance at corners, wheel wells, etc.

Downloads

Installation Instructions (PDF Download)

RDS DOT Permit (PDF Download)