The Red Jacket Submersible Turbine Pump (STP) is responsible for driving fuel from the storage tank, through the piping infrastructure, and into the vehicle through the use of pressure energy. It is the most widely installed submersible fuel pump in the world. And that’s because Red Jacket continues to deliver the highest efficiency and fuel flow, together with the lowest power consumption, in the industry. Since 1878, Red Jacket has continued the tradition of building high quality, reliable pumps that are built to last.
The Red Jacket STP solution optimizes fuel flow and dispensing. The Red Jacket’s motor performance delivers higher flow rates than comparable submersible fuel motors. The STP also features Red Jacket’s advanced packer manifold design, making it the industry’s easiest and safest STP to install and service. Available in 3/4 HP to 2 HP configurations in variable Quick Set (Adjustable) lengths.
Features
Red Jacket Features:- Extensive Range Options: ¾, 1½ or 2 HP versions 3-phase/50Hz to suit wide range of applications and site configurations
- Pressure Technology: Less pipe work and fewer moving parts than equivalent suction system, without risk of vapor lock
- Consistent Flowrate: Pump fuel efficiently over greater distances at higher temperatures and altitudes
- Integrated Line Leak: Mechanical or electronic line leak controlled by TLS monitoring system with automatic shutdown for maximum environmental protection
- Uniquely Designed Extractable: When removed, check valve, leak detector and siphon cartridge remain in manifold and do not require disconnection
- Hazard Isolation: The electrical connection is automatically broken as the extractable is removed - This means that fuel in the manifold and non-isolated piping drains are sent safely back to the tank preventing spills and reducing service costs
- Vertical Product Discharge: Allows easier connection to horizontal pipe work using standard pipe fittings
- Twin Siphon Ports: Two siphon cartridge ports allow connection to multiple systems - Unique swivel design allows easier connection
- Lockable Check Valve: Easily relieve pressure and drain non-isolated product in the manifold and line safely into the tank for testing or maintenance
- Higher flow rates, lower power consumption, and increased safety and reliability
- Up to 5% Increased Flow: Improved stator and receptacle housing design provides larger fuel paths
- 8% Less Power Consumption: More efficient motor design results in 8% reduction in wattage
- Better Quality: Red Jacket’s motor manufacturing yields improved quality, which means more station uptime than other STPs on the market
- Universal Compatibility: Fewer parts to stock
- Improved Reliability: Improved bearing design and upgraded insulation yield longer motor life
- Increased Safety: Maximum temperature remains ~125 degrees cooler vs. competitive models - Enhanced connectors separation meets latest flameproof standards
- Fast installation, simple service and testing, and sets the standard for electrical and environmental safety
- Built-in Isolated Contractor’s Box: Electrical connection housing is built into the manifold and is completely isolated from the fuel path
- Easy to Install and Service: No adjustment required to fit yoke, assembly is quick
- Increased Electrical Safety: Automatic electrical yoke disconnects upon removal of extractable bolts
- Environmentally Friendly: Automatic breaking of extractible seal upon bolt removal ensures automatic fuel drain back into tank, protecting the environment from contamination and site owners from related liability
- Innovative Check Valve Design: “Open” setting makes for easier line tests and servicing
Specifications
- Series: Red Jacket STP - Quick Set (Adjustable) Length
- Model: P75U1
- Length: 72 - 222 in. - Measured from top of the eyebolt to the bottom of the motor inlet
- Horse Power (HP): 0.75
- Kilowatt (KW) 0.56
- Voltage: 208/230
- Phase: Single
- Max. Flow Rate: 68 GPM
- Fluid Compatibility:
- 100% Diesel or Gasoline
- Ethanol and Methanol concentrations up to 15%
- MTBE, ETBE, or TAME concentrations up to 20%
- Installation Requirements:
- Electrical Supply: 3-Phase, 50 Hz, 380 - 415 Volts AC
- Required NPSH (Net Positive Suction Head): 3.94 in./100 mm. Above Pump Inlet
- Hardware Construction:
- Column Pipe and Riser: Standard
- Packer Components: Stainless Steel
- Protective Coatings: N/A
- Operation Environment:
- Class 1, Group D Atmospheres
- Low Corrosion Environment
- Dry Sump Space (No Water Ingress)
- Packer Manifold Access Ports:
- Siphon Ports: 2 Available, 1/4 in. NPT; Vacuums Generated up to 25 in. Hg.
- Line Pressure Port: 1 Available, 1/4 in. NPT
- Vent Port: 1 Available, 1/4 in. NPT
- Check Valve Compatibility:
- Standard VR Ready Check Valve for PLLD
- High Pressure Check Valve for High Pressure Applications
- Agency:
- UL Listings: 100% Diesel, 100% Gasoline, Gasoline and up to: 10% Ethanol, 15% Methanol, 20% MTBE, 20% ETBE, 20% TAME
- Other Agency Listings: cUL
- Certification: ATEX Approval; II 1/2 G EN15268 IIA T3 DEMKO 12 ATEX 1247797 X
Downloads
Installation, Service, & Parts List (PDF Download)
Specifications Sheet (PDF Download)
Red Jacket STP Fuel Compatibility (PDF Download)
Red Jacket Fixed Speed Reliability (PDF Download)
The Benefits to Owning a Red Jacket (PDF Download)
