The 8600 Series Senior spiral gauges are designed for use in measuring liquid levels in hydraulic, lubricating or fuel-oil storage tanks, and gasoline and diesel fuel levels in stationary, standby and mobile generators. The 8600 Series is not recommended for off-road equipment.
The 8640 spiral gauge incorporates a strong nickel-plated Neo magnet capable of driving a TwinSite® sender which provides a direct, fractional reading and also sends an electrical signal to a remote receiver.
Specifications
- Range: 0-90 Ohm
- Mounting: Designed for top-mounting only
- Temperature: Standard operating range is -40°F to 158°F, -40°C to 70°C
- Humidity: Exposed portions should be painted for marine applications, less dial
- Shock: Shorter styles are suitable for some mobile, off-road applications
- Vibration: Shorter styles are suitable for some mobile, off-road applications
- Power: 0.5 watts maximum for TwinSite® versions
- Tank Pressure: 0 to 25 PSIG [0 - 1,7 Bar] maximum
- Approval: Direct indicating gauge. Available UL listed for flammable liquids. Some models UL recognized for marine service
- Accuracy: Accuracy depends upon proper gauge sizing and tank set up - TwinSite dials +/-12%
Construction
- Head: Die-cast zinc
- Guide Rod: Zinc-plated steel
- Centershaft: Brass
- Tie Plate, Guide, & Bearing Pin: Stainless steel
- Center Shaft Holder & Magnet Bushing: Acetal
- Float: Nitrile rubber
- Drive Magnet: Neo, nickel-plated
- TwinSite® Sender: Polyamide
Downloads
MS-516 Spiral - Installation Guide (PDF Download)
