Detecting elastomeric contamination during food, beverage and pharmaceutical processing Rubber Fab offers a full line of metal detectable/x-ray inspectable elastomeric products. Over time and repeated clean-in-place, sterilization, and handling during equipment cleaning, component parts used in food, beverage and pharmaceutical processing equipment and pipework can degrade. As the elastomer degrades, there is a high risk of rubber fragments breaking off, resulting in product contamination, product recall, lost product and down time. Designed to work with existing stainless steel piping and hose systems, Rubber Fab's line of Detectomer® products can be spotted by in-line x-ray inspection and metal detection systems as well as magnetic separators. Fragments can easily be detected allowing your system to quickly reject contaminated product. This also allows worn parts to be replaced without great expense or costly downtime. The entire Detectomer® family of products can be x-ray detected in use with packaging and product that includes glass, metal, stone and high-density plastics, even for products packaged in foil or metalized film.
Features
- Increase effectiveness of existing detection systems
- Reduce product loss
- Minimize product recall
- Decrease operating and labor costs
- Increase customer satisfaction
Specifications
- Type I FKM gaskets
- 3.45 specific gravity
- 1928 PSI tensile strength
- 270% elongation @ break
- 832 compressive stress @1 %
- 2590 compressive stress @ 5%
- 84200 compressive modulus
- 68 Hardness
- Product exposure 250° F (121° C)
- Chemical Solution for Cleaning & Bacterial Treatment 180° F (82° C)
- Certified for FDA,USDA, 3a (for dairy) and are in compliance with the Food Safety Act of 2011.
- WARRANTY. SELLER warrants that if any product of its manufacture upon examination is found by a SELLER'S representative to be defective in either workmanship or material under normal use and service SELLER, at its option, will repair or replace same free of charge including lowest transportation charges but not cost of installation or removal, or have the purchase price refunded, provided that SELLER receives a written claim specifying the defect within ninety (90) days from date of distributor sale or one (1) year from date of factory shipment, whichever occurs first. SELLER further warrants that if a service performed by it for BUYER in installation or repair of equipment or parts examination of SELLER'S manufacture is found by a SELLER'S representative to be defective in workmanship under normal use and service
Applications
- Aluminum pans and tins
- Metalized filming packaging
- Metal or aluminum cans
- Flow-wrapping lines
- Hermetically sealed bags
Downloads
Detectomer Brochure (PDF Download)
Detectomer Part Numbers (PDF Download)
Warranty-Terms & Conditions (PDF Download)
