Smart-Hose LPG transfer standard assemblies with the LL1 couplings incorporate an internally coated cable connected to normally unseated "Valve Plungers" located on each end of the cable. If the LPG hose assembly experiences a catastrophic hose failure, the Smart-Hose Safety System is designed to instantaneously shut off the flow in both directions. Designed as a passive safety device, it needs no human intervention to activate.
The Smart-Hose Safety System is integrated into LPG/propane transfer hose assemblies and is designed to meet the most rugged applications found in the LPG/propane industry. All LPG transfer standard hose assemblies through 3 in. inner diameter sizes are designed to me UL 21 Standards. 4 and 6 in. diameter sizes are built to BS 4089:1989.
Note: LPG hose assembly doesn't include a break-away coupler.
Features
- LL1 design
- Tested under water with dry air or nitrogen to working and test pressures
- Serial numbered
- Shipped with a test certificate and operating booklet
- Meets U.S. Passive Shutoff Mandate for MC330/331 Transports
- Meets NFPA 58 & 59
- 316 stainless steel fittings are designed for reuse on new hose
- Carbon steel ferrules
Specifications
- Size: 1 in.
- Cover: Black chloroprene; perforated, wrapped finish
- Reinforcement: Multiple textile braids
- Tube: Black nitrile
- Temperature: -40°F to 180°F
- Working Pressure: 350 PSI
- Burst Pressure: 1750 PSI
- Coupling Length: 4.4 in.
Product Notes
This Made-to-Order (MTO) item is non-returnable/non-refundable/non-cancellable unless there is a manufacturer defect or warranty issue.
Downloads
Smart-Hose Proper Hose Use - Care - Maintenance (PDF Download)
