Tudertechnica's Glidetech® PTFE Biotech is a suction and delivery hose designed according to EN 12115 standards for food, cosmetic and pharmaceutical products, chemicals and solvents, except for chlorine trifluoride, chlorine and fluorine gas, oxygen difluoride, phosgene and molten alkalis (for ex. sodium). Designed for the chemical industry, foodstuff, pharmaceutical and cosmetic industry, where a flexible connection is required. The hose is produced with high quality elastomers, with excellent chemical and mechanical properties. Tested and certified hose by BUREAU VERITAS for use in Atex area (Ex-Zone). Manufactured according to GMP (Reg. (CE) 2023/2006). Not intended for use as an implant material. Not suitable for blood or human fluids.
Service Temperature Range: -40°F to 302°F (-40°C to +150°C)
Note: Hose is assembled with 316 Stainless Steel Female Coupler x 316 Stainless Steel Female Coupler (CxC) Ends.
Features
- Light and flexible
- Reinforced with synthetic plies
- Wire discharges static electricity
- Oil, chemical, abrasion, aging and ozone resistant glossy cover
- Non-marking when dragged on the floor
- Assembled with 316 stainless steel female coupler ends
Specifications
- Series: Glidetech® PTFE Biotech
- Type: Food/Cosmetic/Pharmaceutical/Chemical/Solvent Suction & Delivery Hose
- Inside Diameter (ID): 3/4 in. (19 mm.)
- Outside Diameter (OD): 1.22 in. (31 mm.)
- Hose Ends: 316 Stainless Steel Female Coupler x 316 Stainless Steel Female Coupler (CxC)
- Length: 5 - 50 ft. - Other Lengths Available - Please Call 1 (800) 333-3331 for More Information
- Inner Tube: Teflon™ PTFE*, Black, Conductive, Smooth, Phthalates Free
- Outer Cover: Wide Corrugated, White with Conductive Chips, Low Friction Material - Meets FDA 21 CFR 177.1520
- Reinforcement: Synthetic Plies, Stainless Steel Wire Helices, A/S Wire to Discharge Static Electricity
- Bend Radius: 3.94 in. (100 mm.)
- Vacuum: 13 PSI (0.9 bar)
- Working Pressure: 150 PSI (10 bar)
- Burst Pressure: 600 PSI (40 bar)
- Operating Temperature Range: -40°F to 302°F (-40°C to +150°C)
- Fluid Compatibility: Food, Cosmetic and Pharmaceutical Products, Chemicals and Solvents, Except for Chlorine Trifluoride, Chlorine and Fluorine Gas, Oxygen Difluoride, Phosgene and Molten Alkalis
- Electrical Properties: Type Ω/T According to Norm EN 12115 (R<10⁶ Ω, R<10⁹ Ω Through the Hose Wall)
- Norm: EN12115
- Weight: 0.43 lbs./ft. (0.64 kg/m.)
*Note: Teflon™ PTFE is a polymer with excellent resistance to high temperature, mechanical stress and oxidation. It complies with FDA 21 CFR 177.1550; DM 21/03/1973 and subsequent amendments; USP class VI main requirements; ISO 10993 - 5:2009, 11:2006; REGULATION 1935/2004/CE; REGULATION 10/2011/CE; REGULATION 1245/2020/CE; 3-A RPSCQC for (62-02) Hose Assemblies. Tested in compliance with 1907/2006/CE (REACH).
Downloads
Data Sheet (PDF Download)
Chemical Chart (PDF Download)
Cleaning Chart (PDF Download)
Cleaning Guidelines (PDF Download)
