null Skip to main content

UltraTech Ultra-Hard Top P2 Plus 2 Drum Spill Pallets - No Drain

Made in the USA
SKU:
UT9612
Manufacturer:
UltraTech International
Dimensions:
67-1/4 in. L x 41-1/4 in. W x 74 in. H
Capacity:
2 Drums, 66 Gallons
Load:
4500 lbs
Weight:
260.00 LBS
$1,643.09
WARNING: This product may contain a chemical known to the State of California to cause cancer & reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Adding to cart… The item has been added
Store hazardous drums safely outdoors with pumps and funnels in place! The Ultra-Hard Top Plus Spill Pallet provides a safe, convenient and effective place to store one or two 55-gallon drums. The roll-top doors above and swing out doors below provide complete and easy access to the inside spill containment area. Simply place your drums inside of the unit with your drum handling equipment or with our optional ramp. Close the doors and you are done. Your drums are protected from the elements and unauthorized access (the unit can be locked) and your property is protected from spills or leaks. Made in the USA.

Features

  • Tall 23 3/4" headspace easily accommodates rotary drum pumps and large conical funnels
  • Low profile (8 3/4") containment pallet positions drum-top funnels at a safe, convenient level to pour hazardous wastes
  • 100% Polyethylene construction will not rust or corrode
  • UV inhibitor in polyethylene resin resists degrading effects of sunlight, adding years to outdoor service life
  • "Swing out" lower doors provide full access to drums for loading and unloading - optional ramp features a non-slip surface
  • Compact loading ramp stores neatly inside when not in use; even when loaded with two 55-gallon drums
  • Simply lift from waist-level to raise the roll-top cover - no need to bend over and reach near ground level as required by alternative products
  • Ultra-Hard Top P2 Plus Spill Pallet is lockable with a standard padlock and can be safely lifted by forklift with drums in place
  • Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175
  • Helps meet Storm water Management Regulations - NPDES, 40 CFR 122.26 (1999)
  • Warranty: Protected by the industry's strongest warranty - Five (5) years against any material or workmanship defects

Specifications

  • Dimensions: 67-1/4 in. x 41-3/4 in. x 74 in.
  • Material Composition: 100% Polyethylene with UV Inhibitors
  • Load Capacity Uniformly Distributed Load: 4500 lbs.
  • Containment Capacity: 66 Gallons (250 L)