The VendaVolt Dual Cashless Timer Payment Station is designed to vend time for connection of electricity between the electrical input from the host dual 40 Amp circuit breaker panel to two different electrical devices such as any of the Bosch EV800 Series Electric Vehicle Chargers. Easy connection between from the host 40 Amp electrical panel circuit breaker over to the host electrical electric vehicle charger station. Bolt the 7 inch diameter 1/4 inch thick steel pipe to the concrete slab location and slide the 54 inch tall sleeve over the pipe. Secure with tamper proof security screws. Can be connected to vend time on 110~120 volt or 208~240 volt electrical devices. Connect the black (L1) and white (L2) to 208~240 volts AC, or connect the black to 110~120 volt hot and the white conductor to common (N).
Note: Does not include the Electric Vehicle Charger.
NOTE: A Nayax $30.00 setup and processing fee is invoiced separately after shipment of the VendaVolt.There is a $7.95/month per unit Nayax data monitoring fee. The fee is for Verizon wireless communications, use of the software management system and telephone support from Nayax.
In the shipment of the system in the box(s) there will be 3 forms to Fill Out for Activating the Nayax Monitoring System for each unit and there will be a Pass Card for each system to use for the time that it takes to get the Nayax data account set up. All banking and payment information will be handled by Nayax in a confidential manner.
Features
- Powered by two (2) wireless Nayax cashless terminals
- Nayax terminals are universally certified EMV & PCI compliant
- The two (2) VPOS smart readers are EMV level 1 and 2, swipe, and contactless approved
- Designed to provide vending machine operators with the ability to centrally manage their operations from one application
Includes
- (2) Nayax AMIT Modem and VPOS Card Reader Devices
- (2) of the U.L. listed 40 Amp Double Pole Single Throw Power Contact Relays
- A dual pair of 10 Gauge 3 conductor 10/3 input and output electrical rubber coated power cables
- Steel 1/4 inch thick x 18 inch tall steel internal protective pipe base.
- (2) VPOS Smart Readers with magnetic swipe slow
- (2) Magnetic Mount Antennas & 3M cables (screw in SMA Connector)
- (2) Pulse Mode Harness
- (2) DEX (1/4 inch male Jack & female socket in a "Y" cable)
- (2) VendaCard RFID Pass Cards
- (2) NEMA Enclosures
- (2) Nayax modems powered by 3.3 Amp 12 V U.L. listed water proof power supplies
- Includes of two pairs of 10 gauge 3 conductor electrical cables from the VendaVolt 40A output power cord that is connected to the VendaVolt internal DPST 40A contactor relay to be connected to the host circuit breaker panel via a 8 gauge wired power source. Can be also connected for 110~120 volt operation
